I've got my computer case open, I popped up the cooling

[Scottso]

thing over the processor, having problem putting back I am replacing the psu in my dell xps 400. Anyways I had to lift the cooling thingy over the processor (had to take out 2 screws). It hinged up and now I am trying to put it back. Idk if its similar in most systems or what, but what I am wondering is do I need to push it back down until it clicks or something or until it is lightly resting in place again? I have it lightly resting back kind of in place but I can't get the screws back in and I don't want to push on the cooling thingy cuz I am scared of crushing something. This is my first time ever doing anything like this (all iv ever done b4 is put ram cards in or pci cards).

[joel666]

lol dont mess with stuff like that if you dont no what your doing

[Navigator]

It will need to "click" back into place. Once it's locked in its position, the holes will line up and you'll be able to put the screws back in. You will have to push on it a little, but not TOO much.

[Zara]

Hello dear, I'm sorry, you are having this problem, what I would suggest you that since you have had already opened it up and you are scared to putting it back, I completly understand your fears, I would suggest you to call computer shops in your area, some private companies may charge you $30 to $50 for an hour, and the job you need is complecated for you and for anyone who would write you instructions or guide you over the phone, because there is still risk involoved as you are not sure what to do, because you may damage something and it ends up costing you whole lot of money. It's better you call someone and discuss your problem. Also check your local newspaper and weekly issues, some people may come at your home to help you. Since this is not a technical or hardware issue, so I dont see anyone would charge you too much money.Also, if you have another computer at home, you may like to go at dell's web site, because some companies has manual online for how to do things yourslef.Good Luck!

[JimPettis]

Michelle's answer was good. AMD sockets that I've worked with have spring clips that connect to both sides of the CPU socket. With the cooling fan off, look at the socket and see if you can locate tabs sticking out on opposite sides of the socket. The spring clip is a piece of steel running through the cooling fan. Try connecting one side of the spring clip to the socket (the more difficult side, if there is one), then slide the cooling fan to the proper position and use a med screwdriver to spring the second clip over the second tab. Be very careful not to slip while using a tool - you may damage the MB. Just be gentle, but very careful.Good luck!Jim